Chauvin Arnoux Make C.A 1950 DiaCam Thermal camera
• 3 seconds only to start up
• 13 hours of continuous operation
• Focus-free with 20° x 20° field of view
• Vocal annotations to record your comments directly on the image
• Connection to current clamps and multimeter: all the necessary measurements simultaneously
For buildings: The Diacam2 C.A 1950 is a powerful tool for analysing new or old buildings. This thermal camera enables you to detect faults and anomalies such as:
• Thermal bridges
• Insulation faults on the exterior of a building
• Draught-proofing
• Presence of excessive humidity
• The C.A 1950 can also be used to search for water leaks and detect embedded or blocked pipes.
For industrial maintenance: For electrical maintenance, the C.A 1950 can detect electrical equipment malfunctions, particularly abnormal heating, before a fault occurs, thus avoiding the considerable cost of halting production or carrying out repairs:
• Faulty electrical contacts
• Unbalance
• Incorrect sizing
Chauvin Arnoux Make C.A 1886 Thermal Camera
For maintenance and building inspections, RayCAm sees everything. Thorough analysis with comprehensive parameterization large screen for easier reading temperature up to 600°C
Thermal sensitivity from 0.08 °C to less than 0.05 °C Matrix up to 384 x 288
New functions
• An analytical tool providing a thermal profile along A horizontal line,
• The possibility of integrating up to five Min, Max and Average analyses on adjustable areas,
• Temperature difference measurements between two tools or in relation to a reference temperature,
• 4 types of isotherms also available as standard features,
• Possibility of assigning different emissivities according to the analytical tools used.
Performance
• Automatic detection of hottest/coldest point
• Parameter settings affecting measurement
• Adjustable emissivity
• Adjustment of measurement distance
• Parameters for defining relative humidity and environmental temperature
• Parameterizable alarms
• Isotherm function
• Storage capacity of 1,000 radiometric images organized in 250 folders and back-up
on SD card
Chauvin Arnoux Make C.A 1886 RayCAm Thermal Camera
This no-contact thermometer offers the possibility of adjusting the emissivity for inspections that match reality. To detect hot spots, a simple scan of the target is all it takes (scanner function). Equipped with an extensive temperature range, it also has a high distance/spot targeting ratio. Alarm thresholds can be set to warn of any temperature overruns.
• Detector: 160 x 120
• Thermal sensitivity: 0.08 °C at 30 °C
• Measurement range: - 20 °C to + 600 °C (1,000 °C or 1,500 °C available as an option)
• MixVision mode to view the IR image, the real image and the overlay of the IR image on the real image
• 4 cursors: 3 manual cursors, 1 automatic cursor.
• Temperature profile, Min./Max./Avg. on area, isotherm, temperature differential.
• Influencing quantities: emissivity (possibility of assigning different emissivities according to the analytical tools used), environmental temperature, distance, relative humidity
• Storage of 1,000 radiometric images on MiniSD card
• 3.5-inch multi-directional screen
• Protection: IP 54
• Video output for use on video projector
• Torch and laser pointer
• Delivered in hard case with RayCAm Report software as standard (analysis and reports)
