Metrix Make SCOPIX III—Portable isolated Channels (2& 4) Oscilloscopes (40MHz to 200MHz)
Scopix III is a stand-alone oscilloscope with 4 totally-isolated 600 V channels with up to 200 MHz bandwidth. It is now equipped with an extended 50k memory (option), considerably increasing the recording durations available.
OSCILLOSCOPE + MULTIMETER + RECORDER + HARMONIC ANALYSER
Ergonomic: 5.7" TFT monochrome or colour touch screen with backlighting for easier reading,
Control: 33 direct command keys / "Windows-like" menus / touch screen.
Rich with original functions, like the whole SCOPIX range, the OX 7204 four-channel 200 MHz digital oscilloscope, a "multi-instrument" with a minimum footprint, provides outstanding performance, thanks in particular to its 12-bit / 2.5 GS/s converter.
• In addition to its advanced triggering functions (pulse width, count, delay, TV), SCOPIX III offers triggering and automatic storage of faults on the basis of the measurement thresholds.
• This OSCILLOSCOPE also has "MATH" functions which can be used to define, for each trace, a mathematical function and a vertical scale with the definition of the true physical unit.
• Thanks to FFT, the qualitative analysis of harmonics, signal distortion and pulse response, and the investigation of noise sources in logic circuits lead to effective diagnostics.
• The multi-channel TRMS digital MULTIMETER - 8,000 counts, 200 kHz - measures amplitudes, resistances, continuity, capacitances, frequencies and temperatures, and performs tests on components. It includes a recorder with windows from 5 min to 24 hours.
• The HX0075 POWER module (option) enables the OX 7204 to perform power measurements: single and three-phase power, display of DPF, harmonic analysis on the apparent power, etc.
• The HARMONIC ANALYZER(optional) can display the first 32 orders for signals with a fundamental frequency between 40 and 450 Hz.
• The 2-channel DIGITAL RECORDER (optional) allows acquisition intervals of 500µs between 2 measurements, for records that can extend over 1 month, based on the monitoring of tolerance thresholds in particular.
• 2-hour fast charging; battery life up to 8 hours
• The patented PROBIX plug-and-play system of accessories ensures rapid implementation of the instrument, with no risk of error. The sensor coefficients, scales, and units and the configurations of the channels are managed automatically; the probes and adapters are recognized as soon as they are connected.
Multi-interface communication: RS232/USB and the Ethernet interface with ScopeNetweb server make it possible to take control of the instrument remotely, and to transfer curves and screen shots without additional software.
• Whatever your internet browser, you can dialogue with SCOPIX via its built-in ScopeNet web server
• A ScopeNetANDROID application is available from Google Store.
SCOPIX BUS—Bus Analyzers (200MHz, 2 & 4 channels)
Scopix III-BUS is a stand-alone oscilloscope with 2/4 totally-isolated 600 V channels with 200 MHz bandwidth. It is now equipped with an extended 50k memory (option), considerably increasing the recording durations available.
OSCILLOSCOPE + MULTIMETER + RECORDER + FIELDBUS ANALYSER
Ergonomic: 5.7" TFT monochrome or colour touch screen with backlighting for easier reading,
Control: 33 direct command keys / "Windows-like" menus / touch screen.
Rich with original functions, like the whole SCOPIX range, the OX 7204-BUS four-channel 200 MHz digital oscilloscope, a "multi-instrument" with a minimum footprint, provides outstanding performance, thanks in particular to its 12-bit / 2.5 GS/s converter.
In addition to its advanced triggering functions (pulse width, count, delay, TV), SCOPIX III offers triggering and automatic storage of faults on the basis of the measurement thresholds.
• This OSCILLOSCOPE also has "MATH" functions which can be used to define, for each trace, a mathematical function and a vertical scale with the definition of the true physical unit.
• Thanks to FFT, the qualitative analysis of harmonics, signal distortion and pulse response, and the investigation of noise sources in logic circuits lead to effective diagnostics.
• The multi-channel TRMS digital MULTIMETER - 8,000 counts, 200 kHz - measures amplitudes, resistances, continuity, capacitances, frequencies and temperatures, and performs tests on components. It includes a recorder with windows from 5 min to 24 hours.
• The 2-CHANNEL PHYSICAL FIELDBUS ANALYSER for testing the physical integrity of the main fieldbuses: verification of transmission quality according to the applicable standards.
• The 4-channel DIGITAL RECORDER (optional) allows acquisition intervals of 500µs between 2 measurements, for records that can extend over 1 month, based on the monitoring of tolerance thresholds in particular.
• 2-hour fast charging; battery life up to 8 hours
• The patented PROBIX plug-and-play system of accessories ensures rapid implementation of the instrument, with no risk of error. The sensor coefficients, scales, and units and the configurations of the channels are managed automatically; the probes and adapters are recognized as soon as they are connected .
Multi-interface communication: RS232/USB and the Ethernet interface with ScopeNetweb server (except in BUS mode) make it possible to take control of the instrument remotely, and to transfer curves and screen shots without additional software.
• Whatever your internet browser, you can dialogue with SCOPIX via its built-in ScopeNet web server
• A ScopeNetANDROID application is available from Google Store.
HandScope—Smallest portable isolated channels oscilloscopes (20MHz/40MHz, 2 channels)
The shockproof, IP54, HANDSCOPE OX 5042 oscilloscope fits comfortably in one hand.
This ergonomic instrument is also equipped with a TFT colour screen and LED backlighting for precise data display. To make it simpler to use, intuitive pictograms and integrated multilingual help are available at all times.
The HANDSCOPE combines three measuring instruments in 1 on 2 channels:
•
20/40 MHz oscilloscope with 2 totally-isolated 600 V CAT III channels
• 20/40 MHz bandwidth – 2 GS/s - 5 mV to 200 V/div and 25 ns to 200 s/div
• Independent 8,000-count multimeter with power measurements,
• Built-in 31-order harmonic analyser (fundamental between 40 and 450 Hz)
• 2 MB are available for recording data and, in multimeter mode, it is possible to store graphic recordings of 2,700 measurements (5 min to 1 month).
• Isolated USB communication with the SCPI protocol is available. This makes it simple to program the instrument remotely with the SX-METRO software.
These products have been developed using an Eco-Design approach to reduce their environmental impact. They come with a 3-year warranty.
OXI 6204 –Benchtop Isolated channels Oscilloscope—(200MHz, 4 Channels)
Advantages
• 32 direct command keys, "Windows-like" menus and graphical commands on 5.7-inch touch
screen.
• 4 channels isolated from one another and in relation to the earth on reinforced plastic BNC
connectors, in replacement of the METRIX OX 8022, OX 8042 and OX 8062 mixed differential
oscilloscopes.
• 2.5 GS/s sampling rate in one-shot mode and 100 GS/s in repetitive mode
• Resolution: 12 bits
• "Real-time" FFT analysis, simple and complex calculation functions on the channels over
2,500 pts
• TRMS, 8,000-count, 200 kHz digital multimeters with time/date-stamped graphical recording
on all 4 channels
Description
The OXi 6204 benchtop digital oscilloscope meets the needs of the power electronics, maintenance and electrical engineering, replacing the Metrix differential oscilloscopes. The OXi 6204 is ideal for the measurements required by engineers, lab technicians, technical staff, teachers, electronic and electrical instrument manufacturers, etc. It can be used for multiple applications: electrical maintenance, R&D, repair and after-sales laboratories, technical training, etc.
Compact, stable and lightweight, the OXi 6204 is equipped with a handle and a built-in storage compartment. It has a 5.7-inch touch screen for access to the graphical commands and 32 keys for direct access to the functions on the front panel.
In performance terms, the OXi 6204 offers fast sampling and high resolution with its 12 bit / 2.5 GS/s converter, 100 GS/s sampling on periodic signals, and 2 ns transient capture, thus avoiding under sampling. It offers a wide range of trigger possibilities: edge, pulse width, delay, counting, TV. It also includes the Backup/Restart mode on measurement thresholds with recording as a file. The complete Auto set function in less than 5 s with recognition of the channels is useful, particularly for automatic configuration of the FFT analysis.
The classic or advanced MATH functions can be used to cover special new functions, including simulation of a trace from its mathematical equation and modelling of an expected result.
Equipped with 4 x 8,000-count TRMS digital multimeters, the OXi 6204 can be used for the traditional voltage, resistance, continuity, capacitance and frequency measurements, as well as diode tests. It can also measure temperature with a Pt100 sensor , in addition to single and three-phase power on a bandwidth of 200 kHz.
There are 3 other modes in addition to the oscilloscope and multimeter modes:
-the RECORDER mode can be used for long and slow recordings,
-the HARMONICS mode for measuring the THD on a fundamental frequency from 40 to 450 Hz,
-the FFT mode calculated over 2,500 points on each channel, which can be adjusted automatically
Additional technical specifications:
Number of channels: 4 channels on plastic BNC connectors isolated from the earth
Vertical sensitivity: Calibres from 2.5 mV to 200 V/div
Horizontal deflection: Calibres from 1 ns/div to 200 s/div.
Memory depth: 50,000 points / channel
User memory: 2 MB for storing the files: trace, text, configuration, math functions, print files, image files, etc.,+ large-capacity removable (2 GB)
