Prodigit Make 36000A Series(50KW / 60KW)High Power DC Electronic Load
Features:
• 5 digit V/A/W Meter.
• High-speed measurement and communication transmission.
• Large LCD Display, setting values can be adjusted by rotary knob or push button.
• Voltage, Current and Watt value can be displayed simultaneously.
• Capable for Power Factor Correction (PFC) Test.
• OCP、OPP test function automatically.
• Power ON status can be set.
• CC, CR, CV, CP, Dynamic and Short operation mode.
• SHORT time setting.
• Protections against I,W,°C and over-voltage alert.
• Voltage meter display the polarity positive(”+”)or negative(”-”)is selectable.
• Optional Interface : GPIB、RS232、USB、LAN.
• Descriptions
• 36000 Series has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 sets Store / Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB、RS232、USB and LAN interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually and there is an external signal input for a Arbitrary Waveform to simulate load current.
• Single key for OCP、OPP test function will be more efficiency and accuracy on OCP、OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ” + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
• Maximum Voltage up to 1000V provide an idea testing solution for Power Factor Correction test.
PRODIGIT Make 34000A Series ( 5KW ~40KW) High Power DC Electronic Load
• 5 digit V/A/W Meter.
• High-speed measurement and communication transmission.
• Large LCD Display, setting values can be adjusted by rotary knob or push button.
• Voltage, Current and Watt value can be displayed simultaneously.
• Capable for Power Factor Correction (PFC) Test. (for 600V,1000V models)
• OCP, OPP test function automatically.
• Power ON status can be set.
• CC, CR, CV, CP, Dynamic and Short operation mode.
• SHORT time setting.
• Protections against I, W,°C and over-voltage alert.
• Voltage meter display the polarity positive (”+”)or negative(”-”)is selectable.
• Optional Interface : GPIB, RS232, USB, LAN.
Descriptions
• 34000 Series has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 sets Store / Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB、RS232、USB and LAN interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually and there is an external signal input for a Arbitrary Waveform to simulate load current.
• Single key for OCP、OPP test function will be more efficiency and accuracy on OCP OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ” + “ or “ –“ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
• Maximum Voltage up to 1000V provide an idea testing solution for Power Factor Correction test.
PRODIGIT Make 3320 Series DC Electronic Load
• Can be configured in
• 3301A〔four channels mainframe〕
• 3302A〔single channel mainframe〕
• CC Static, Short Mode
• Dual 4 1/2 V/A Meter on each module
• Current Slew Rate control capability
• 5 Memory Store / Recall on each Module
• Protections against V, W, and ℃
Descriptions
• 3320 series module are used with the 3301A 4ch Mainframes and 3302A single channel Mainframe.
• Each 3320 series module has its own control and display panel with constant current operating mode.
• 5 states Store/Recall memory on 3302 and 3301A mainframe which provides load set-up more efficiently.
Applications
• Voltage source testing
• SMPS Load Regulation
• Power Supply Life testing
• Short circuit Testing
• Battery discharge
• Production Line, and QC
• Burn-in
3310F Series
DC Electronic Load—75/150/300 Watts
Feature
• 5 digital V / A / W Meter.
• High-speed measurement and communication transmission.
• V.A.W. values can be displayed simultaneously.
• Large LCD Display、setting values can be adjusted by rotary knob or push button.
• OCP 、 OPP test function.
• Must be configured in 3302F〔single channel mainframe〕、3305F〔two channels mainframe〕or 3300F〔four channels mainframe〕and the mainframe with 150 sets Store / Recall memory.
• Power ON status value can be set.
• Flexible CC. CR, CV, CP, Dynamic and Short operation modes.
• SHORT time setting and SHORT_VH, SHORT_VL setting function.
• Protections against V, I, W, and °C.
• Voltage meter display the polarity positive(” + ”)or negative(” - ”)is selectable.
• SYNC. Load ON function.
• Optional Interface : GPIB、RS232、USB、LAN.
• Supply MPPT CC, CR, CV test function for solar panel
• Function test for BMS protection board is provided (option)
Description
• Each 3310F Series module has its own control and display panel, CC/CR/CV/CP/Dynamic modes, plug in 3300F with 150 sets Store/Recall memory which provides load set-up more efficiently,also can be controlled intranet via RS232、Ethernet、USB and GPIB interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function,also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually and there is an external signal input so that load can have a simulated Arbitrary Waveform.
• The additional OCP 、OPP test function operated by both mainframe and module that will be more efficiency and accuracy on OCP, OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display “ + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement.
• Short, OCCP and OCDP function test for BMS protection board is provided (option)
Applications
• Voltage / Current source
• SMPS transient response
• Current limit testing and battery emulation
• Battery charger
• Battery discharge
• R&D, Quality Control
• ATE system
• Production testing
3330F
Dual DC Electronic Load up to 250 watts
Feature
• 5 digital V / A/W Meter.
• Isolated two loads unit within one module.
• Large LCD Display、setting values can be adjusted by rotary knob or push button.
• 2 sets V. A. W. values can be displayed simultaneously.
• OCP、OPP test function.
• Must be configured in 3302F〔single channel mainframe〕、3305F〔two channels mainframe〕or 3300F〔four channels mainframe〕and the mainframe with 150 sets Store / Recall memory.
• Power ON status value can be set.
• Flexible CC. CR, CV, CP, Dynamic and Short operation modes.
• SHORT time setting and SHORT_VH, SHORT_VL setting function.
• Protections against V, I, W, and °C.
• Voltage meter display the polarity positive(” + ”)or negative(” - ”)is selectable.
• SYNC. Load ON function.
• Optional Interface : GPIB、RS232、USB、LAN.
Description
• 3330F Series Dual DC Electronic Load is a two load unit in one module. Each 3330F Series module has its own control and display panel, CC/CR/CV/CP/ Dynamic modes, plug in 3300F with 150 sets Store/Recall memory which provides load set-up more efficiently,also can be remote controlled via RS232、Ethernet、USB and GPIB interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function,also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually.
• The additional OCP 、OPP test function will be more efficiency and accuracy on OCP, OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display “ + “ or “ – “ is selectable and 150 sets Store / Recall larger memory is much advance features for each different application.
• 150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement.
Applications
• Voltage / Current source
• SMPS transient response
• Current limit testing and battery emulation
• Battery charger
• Battery discharge
• R&D, Quality Control
• ATE system
• Production testing
3341G
LED DC Electronic Load Simulator
Features
• LED mode load for LED Power Driver test.
• CC, CR, CV, CP, LED and Dynamic mode.
• Simulate LED Forward Bias Voltage (Vd) and Resistance (Rd).
• Fast Response for PWM dimming test.
• Built-in dimming control signal for PWM dimming test.
• Short circuit test by external relay (built-in short relay driver circuit).
• 5 digital V / A / W Meter.
• Protections against V, I, W, and ℃.
• Must be configured in 3302F〔single channel mainframe〕、3305F〔two channels mainframe〕or 3300F〔four channels mainframe〕and the mainframe with 150 sets Store / Recall memory.
• Optional Interface:GPIB、RS232、USB、LAN.
Descriptions
• Each 3340G Series module has its own control and display panel, LED/CC/CR/CV/CP/ Dynamic modes, plug in 3300F with 150 sets Store/Recall memory which provides load set-up more efficiently,also can be controlled intranet via RS232、Ethernet、USB and GPIB interface.
• Short circuit test by external relay (there is an optional fixture for short), Short Time can be set and Short Voltage can be measured.
• Built-in dimming control signal output is for PWM dimming test.
• Simulate LED forword Bias voltage (Vd) and Resistance (Rd).
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display “ + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement.
LED DC Electronic Load Simulator for LED Power Driver Test Description
Applications
• LED Driver
• Voltage / Current source
• SMPS transient response
• Current limit testing and battery emulation
• Battery charger
• Battery discharge
• R&D / Quality Control
• ATE system
• Production testing
3350F
High Power DC Electronic Load—600/1200/1800 watts
Feature
• 5 digit V / A / W Meter.
• High -speed measurement and communication transmission.
• Large LCD Display、setting values can be adjusted by rotary knob or push button.
• Voltage、Current and Watt value can be displayed simultaneously.
• OCP、OPP test function.
• Power ON status can be set.
• CC, CR, CV, CP, Dynamic and Short operation mode.
• SHORT time setting.
• Protections against V,I,W, and ℃.
• Voltage meter display the polarity positive(”+”)or negative(”-”)is selectable.
• Optional Interface:GPIB、RS232、USB、LAN.
Description
• 3350F has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 sets Store/Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB, RS232、USB and LAN interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually and there is an external signal input for a Arbitrary Waveform to simulate load current.
• Single key for OCP 、OPP test function will be more efficiency and accuracy on OCP、OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ” + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
Applications
• Voltage / Current source
• SMPS transient response
• CV/Current limit testing and battery emulation
• Battery charger
• Battery discharge
• R&D Quality Control
• ATE system
• Production testing
3360F Series
High Voltage DC Electronic Load—600W~14.4KW
Feature
• 5 digit V/A/W Meter.
• High-speed measurement and communication transmission.
• Large LCD Display、setting values can be adjusted by rotary knob or push button.
• Voltage,Current and Watt value can be displayed simultaneously.
• 150 sets Store/Recall memory.
• Power Factor Correction (PFC) Test.
• OCP,OPP test function.
• Power ON status can be set.
• CC, CR, CV, CP, Dynamic and Short operation mode.
• SHORT time setting.
• Protections against V,I,W, and ℃.
• Voltage meter display the polarity positive(”+”)or negative(”-”)is selectable.
• Optional Interface:GPIB、RS232、USB、LAN.
Description
• 3360F has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 sets Store/Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB, RS232,USB and LAN interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually and there is an external signal input for a Arbitrary Waveform to simulate load current.
• Single key for OCP ,OPP test function will be more efficiency and accuracy on OCP,OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ” + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
• Maximum Voltage up to 500V that provides an ideal testing solution for Power Factor Correction testing.
Applications
• Voltage / Current source
• SMPS transient response
• CV/Current limit testing and battery emulation
• Battery charger
• Battery discharge
• R&D Quality Control
• ATE system
• Production testing
• Power Factor Correction (PFC) Test
33500F Series
High Power DC Electronic Load—2400 watts to 14 KW.
Feature
• 5 digit V/A/W Meter.
• High-speed measurement and communication transmission.
• Large LCD Display、setting values can be adjusted by rotary knob or push button.
• Voltage、Current and Watt value can be displayed simultaneously.
• OCP、OPP test function automatically.
• Power ON status can be set.
• CC, CR, CV, CP, Dynamic and Short operation mode.
• SHORT time setting.
• Protections against V,I,W, and °C.
• Voltage meter display the polarity positive(”+”)or negative(”-”)is selectable.
• Optional Interface : GPIB、RS232、USB、LAN.
Description
• 33500F Series has its own control and display panel, CC / CR / CV / CP / Dynamic modes, 150 sets Store/Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB、RS232、USB and LAN interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually and there is an external signal input for a Arbitrary Waveform to simulate load current.
• Single key for OCP 、OPP test function will be more efficiency and accuracy on OCP、OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ” + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
Applications
• Voltage / Current source
• SMPS transient response
• CV/Current limit testing and battery emulation
• Battery charger
• Battery discharge
• R&D Quality Control
• ATE system
• Production testing
3250A Series AC/DC Electronic Loads
Feature
• Must be configured in 3302C〔single channel mainframe〕or 3300C〔four channels mainframe〕
• CC, Linear CC, CR and Crest Factor mode.
• Dual 4 1/2 V / A / W / VA Meter on each module.
• Last Setting Memory on each module.
• Five Memory on Mainframe.
• GO/NG limit Check.
• Protections against V, I, W, and ℃.
Description
• The 3250A series AC&DC Load Module is suitable for Sine, Square, Step wave testing which provides an idea testing solution for UPS, AVR, D/A inverter, especially for step or square waveform U.U.T.
• Each AC&DC Load has it own control and display panel, plug in 3302C or 3300C with 5 states
• Store/Recall memory which provides load set-up more efficiently.
• Adjustable power factor setting (PF, Range : 1, 0.85 ~ -0.85 ) extends the simulation of test environment.
• Built-in GO/NG meter check function offers brief test result diagnosis for production, QC test throughput.
Applications
• AC&DC, DC&DC, DC&AC testing
• DC,40~400Hz Power Transformer
• Battery discharge
• Can be Paralleled more units for higher power
• R&D, QC
3260A Series AC/DC Electronic Loads
Feature
• Voltage, Current, Watt and VA vaule display.
• CC、Linear CC、CR, and Crest Factor mode.
• GPIB/RS232 Interface and 5 states Recall/Store Memory.
• Power factor (PF) adjustable : 1, 0.85 ~ -0.85.
• Threshold Upper/Lower limit capability.
• Protections against V, I, W, and ℃.
• Dual 4 1/2 Meter Display for Voltage, Current, Watt and VA.
• Suitable for Sine, Square, Step wave.
Description
• The 3260A Series is a 300V High power AC and DC Load in one unit, it provides an ideal testing solution for UPS, AVR, D/A inverter, especially for step or square waveform UUT
• Each High power Series AC&DC Load has it own control and display panel, and with 5 states Recall / Store memory which provides load set-up more efficiently
• Adjustable power factor setting (PF, Range: 1, 0.85 ~ -0.85) extends the simulation of test environment
• Built-in GO/NG meter check function offers brief test result diagnosis for production, QC test throughput.