Chauvin-Arnoux Brand Make F 62: Leakage multimeter clamps
In the event of an insulation fault or untimely tripping of RCDs, the F62 clamp is the ideal tool for detecting and measuring the leakage currents flowing to earth.
The versatile F62 clamp also offers all the functions of a multimeter clamp.
Specifications:
• 10,000-count backlit display
• Current: 30 µA to 100 A AC
• Resolution : 10 µA
• 50/60 Hz anti-harmonic filter
• High immunity to eddy currents: 70 dB
• AC/DC voltage: 0.1 V to 600 V
• Frequency: 5 Hz to 1 kHz
• Resistance: 0.1 Ω to 1 kΩ
• Audible continuity: < 35 Ω
• Functions: Max, Relative, display memorization
• Automatic power-off with battery status indication
• 300 V CAT III
Chauvin-Arnoux Brand Make F 65: Leakage multimeter clamps
In the event of an insulation fault or untimely tripping of RCDs, the F65 clamp is the ideal tool for detecting and measuring the leakage currents flowing to earth.
The versatile F65 clamp also offers all the functions of a multimeter clamp. In addition, the F65 clamp is equipped with an RMS converter to ensure that the measurements remain accurate even in the presence of distorted signals.
Specifications:
• 10,000-count backlit display
• Current: 30 µA to 100 A AC
• Resolution: 10 µA
• 50/60 Hz anti-harmonic filter
• High immunity to eddy currents: 70 dB
• AC/DC voltage: 0.1 V to 600 V
• Frequency: 5 Hz to 1 kHz
• Resistance: 0.1 Ω to 1 kΩ
• Audible continuity: < 35 Ω
• Functions: Max, Relative, display memorization
• Automatic power-off with battery status indication
• 300 V CAT III
Chauvin /Arnoux Make F201: Digital Multimeter Clamp
The F201 clamp is ideal for the needs of both self-employed electricians and SME contractors in the electrical sector.
Equipped with a fast 12-bit TRMS digital acquisition system, F201 clamps offer particularly accurate measurements whatever the signal's waveform.
Specifications:
• Clamping diameter: 34 mm
• Current: 600 A AC
• AC and DC voltage up to 1,000 V
• Resistance and audible continuity
• Temperature
• Automatic AC/DC detection
• TrueInrush current measurement
• Hold, Min, MAX
• CAT IV 600 V
Chauvin /Arnoux Make F203: Digital Multimeter Clamp
The F203 clamp is ideal for the needs of both self-employed electricians and SME contractors in the electrical sector.
Equipped with a fast 12-bit TRMS digital acquisition system, F203 clamps offer particularly accurate measurements whatever the signal's type and waveform.
Specifications:
• Clamping diameter: 34 mm
• 600 A AC / 900 A DC current measurement
• AC and DC voltage up to 1,000 V
• Resistance and audible continuity
• Temperature
• Automatic AC/DC detection
• TrueInrush current measurement
• Hold, Min, MAX
• RELative (ΔX) and differential (ΔX/X) measurements
• Adapter function
• CAT IV 600 V
Chauvin /Arnoux Make F205: Digital Multimeter Clamp
The F205 clamp is ideal for low and medium-power Low-Voltage applications, maintenance of tertiary or industrial electrical installations and troubleshooting and sizing of electrical power supplies.
Equipped with a fast 12-bit TRMS digital acquisition system, F205 clamps offer particularly accurate measurements whatever the signal's type and waveform.
Specifications:
• Clamping diameter: 34 mm
• Current: 600 A AC / 900 A DC
• AC and DC voltage up to 1,000 V
• Resistance and audible continuity
• Power values (W, var, VA, PF) and harmonics (THDf, THDr)
• "2- wire method" phase rotation
• Automatic AC/DC detection
• TrueInrush current measurement
• Min, MAX, Peak+, Peak-
• RELative (ΔX) and differential (ΔX/X) measurements
• CAT IV 600 V
Chauvin /Arnoux Make F401: Digital Multimeter Clamp
To deal with the highest level of low-voltage electrical installations, the F400 Series has a high protection rating and is ideal for maintenance, testing, monitoring and diagnostics on medium-power installations.
Equipped with a fast 12-bit TRMS digital acquisition system, F401 clamps offer particularly accurate measurements whatever the signal's waveform.
Specifications:
• Clamping diameter: 48 mm
• Current: 1,000 A AC
• AC and DC voltage up to 1,000 V
• Resistance and audible continuity
• Temperature
• Automatic AC/DC detection
• TrueInrush current measurement
• Hold, Min, MAX
• CAT IV 1,000 V
• IP54 protection rating
Chauvin /Arnoux Make F403: Digital Multimeter Clamp
Equipped with a fast 12-bit TRMS digital acquisition system, F403 clamps offer particularly accurate measurements whatever the signal's waveform.
Specifications:
• Clamping diameter: 48 mm
• Current: 1,000 A AC / 1,500 A DC
• AC and DC voltage up to 1,000 V
• Resistance and audible continuity
• Temperature
• Automatic AC/DC detection
• TrueInrush current measurement
• Hold, Min, MAX
• RELative (ΔX) and differential (ΔX/X) measurements
• Adapter function
• CAT IV 1000 V
• IP54 protection rating
Chauvin /Arnoux Make F405: Digital Multimeter Clamp
Equipped with a fast 12-bit TRMS digital acquisition system, F405 clamps offer particularly accurate measurements whatever the signal's waveform.
Specifications:
• Clamping diameter: 48 mm
• Current: 1,000 A AC / 1,500 A DC
• AC and DC voltage up to 1000 V
• Resistance and audible continuity
• Power values (W, var, VA, PF) and harmonics (THDf, THDr)
• "2-wire method" phase rotation
• Automatic AC/DC detection
• TrueInrush current measurement
• Min, MAX, Peak+, Peak-
• RELative (ΔX) and differential (ΔX/X) measurements
• CAT IV 1,000 V
• IP54 protection rating
Chauvin /Arnoux Make F407: Digital Multimeter Clamp
The F407 clamp is ideal for low-voltage, medium-power systems in LV electricity production and distribution, industry, railways, etc. It is also suitable for lift/elevator technicians and other lifting and transport equipment specialists. Maintenance, testing, monitoring, diagnostics and connection are the main applications for the clamps in this series.
Equipped with a fast 12-bit TRMS digital acquisition system, F407 clamps offer particularly accurate measurements. Due to their large bandwidth and high crest factor, these clamps guarantee accurate measurements whatever the type of signal. Automatic AC/DC detection is a standard feature on all the models in this range, as is IP54 protection. The large backlit 10,000-count display makes it easy to read in all circumstances. The fact that each rotary-switch position corresponds to a single function means that it is simple to use.
Advantages:
• AC and DC measurements
• Measurements of power and energy values
• Decomposition of harmonic orders
• Measurement recorder
Specifications:
• Current: 1,000 AAC / 1,500 ADC
• AC and DC voltage up to 1,000 V
• Power values: W / VA / var, PF & DPF
• THD-f & THD-r
• Harmonics up to 25th order
• Resistance and audible continuity
• Analysis of Min, Max and Peak± on all functions
• TrueInrush current measurement
• Data recording
• Bluetooth interface and PC software
Chauvin /Arnoux Make F601: Digital Multimeter Clamp
With protection against electric shocks up to 12 kV, the F600 Series fulfils the most demanding safety criteria (CAT IV 1,000 V) and offers a high protection rating allowing users to work in total safety on all LV installations.
The F600 Series is ideal for high-power applications such as electrical power distribution, chemical and petrochemical industries, metallurgy, rail transport, etc.
Equipped with a fast 12-bit TRMS digital acquisition system, F601 clamps offer particularly accurate measurements whatever the signal's waveform.
Specifications:
• Clamping diameter: 60 mm
• Current: 2,000 A AC
• AC and DC voltage up to 1,000 V
• Resistance and audible continuity
• Temperature
• Automatic AC/DC detection
• TrueInrush current measurement
• Hold, Min, MAX
• CAT IV 1,000 V
• IP54 protection rating
Chauvin /Arnoux Make F603: Digital Multimeter Clamp
With protection against electric shocks up to 12 kV, the F600 Series fulfils the most demanding safety criteria (CAT IV 1,000 V) and offers a high protection rating allowing users to work in total safety on all LV installations.
The F600 Series is ideal for high-power applications such as electrical power distribution, chemical and petrochemical industries, metallurgy, rail transport, etc.
Equipped with a fast 12-bit TRMS digital acquisition system, F603 clamps offer particularly accurate measurements whatever the signal's waveform.
Specifications:
• Clamping diameter: 60 mm
• Current: 2,000 A AC / 3,000 A DC
• Tension AC et DC jusqu’à 1000 V
• Resistance and audible continuity
• Temperature
• Automatic AC/DC detection
• TrueInrush current measurement
• Hold, Min, MAX
• RELative (ΔX) and differential (ΔX/X) measurements
• Adapter function
• CAT IV 100 V
• IP54 protection rating
Chauvin /Arnoux Make F605: 2,000 A TRMS AC+DC multimeter clamp
With protection against electric shocks up to 12 kV, the F600 Series fulfils the most demanding safety criteria (CAT IV 1,000 V) and offers a high protection rating allowing users to work in total safety on all LV installations.
The F600 Series is ideal for high-power applications such as electrical power distribution, chemical and petrochemical industries, metallurgy, rail transport, etc.
Equipped with a fast 12-bit TRMS digital acquisition system, F605 clamps offer particularly accurate measurements whatever the signal's waveform.
Specifications:
• Clamping diameter: 60 mm
• Current: 2,000 A AC / 3,000 A DC
• AC and DC voltage up to 1,000 V
• Resistance and audible continuity
• Power values (W, var, VA, PF) and harmonics (THDf, THDr)
• "2-wire method" phase rotation
• Automatic AC/DC detection
• TrueInrush current measurement
• Min, MAX, Peak+, Peak-
• RELative (ΔX) and differential (ΔX/X) measurements
• CAT IV 1,000 V
• IP54 protection rating
Chauvin /Arnoux Make F607: 2,000 A TRMS AC+DC multimeter clamp
With its 60 mm clamping diameter and current measurements up to 3000A, the F607 clamp is ideal for low-voltage electrical power distribution and transmission applications. Equipped with a fast 12-bit TRMS digital acquisition system, F607 clamps offer particularly accurate measurements. Due to their large bandwidth and high crest factor, these clamps guarantee accurate measurements whatever the type of signal.
Automatic AC/DC detection is a standard feature on all the models in this range, as is IP54 protection. The large backlit 10,000-count triple display makes it easy to read in all circumstances. The fact that each rotary-switch position corresponds to a single function means that it is simple to use. Principal applications: maintenance, testing, monitoring, diagnostics, sizing, connection, etc.
Advantages:
• AC and DC measurements
• Power and energy measurements
• Decomposition of harmonic orders
• Measurement recorder
Specifications:
• Current: 2,000 AAC/ 3,000 ADC
• AC and DC voltage up to 1,000 V
• Power values: W/VA/var, PF & DPF
• Harmonics up to the 25th order, THD-f & THD-r
• Ripple function
• Resistance and audible continuity
• Min, Max and Peak± analysis on all the functions
• True Inrush current measurement
• Bluetooth interface and PC software
• 10,000-count triple display
Metrix a Chauvin-Arnoux Brand Make MX 650
The MX 650 clamp combines the functions of an AC/DC multimeter and an AC current clamp up to 1,000 A.
It is extremely easy to grip with a highly readable display.
Specifications:
• 4,000-count display
• 42-segment bargraph
• Clamping diameter: 40 mm
• AC current: 0.05 A to 1,000 A
• AC voltage: 0.5 V to 750 V
• DC voltage: 0.2 V to 1,000 V
• Resistance: 0.2 Ω to 4 kΩ
• Frequency: 10 Hz to 4 kHz (A) / 10 kHz (V)
• Audible continuity test & diode test
• Safety: EN 61010 CAT III 600 V
• Functions:
• HOLD
• PEAK (capture of 1ms signals)
• MIN-MAX
• REL (relative measurements)
Metrix a Chauvin-Arnoux Brand Make MX 655
Combining the basic functions of a multimeter and a Hall-effect current clamp for measuring DC and AC currents up to 1,000 A.
The use of an RMS converter ensures accurate measurements whatever the type or waveform of the signal.
It is extremely easy to grip and has a highly readable display.
Specifications:
• 4,000-count display
• 42-segment bargraph
• Clamping diameter: 40 mm
• AC current: 0.05 A to 1,000 A RMS
• DC current: 0.1 A to 1,000 A
• AC voltage: 0.5 V to 750 V
• DC voltage: 0.2 V to 1,000 V
• Resistance: 0.2 Ω to 4 kΩ
• Frequency: 20 Hz to 10 kHz (A) / 10 Hz to 10 kHz (V)
• Audible continuity test & diode test
• Safety: EN 61010 CAT III 600 V
• Functions:
• HOLD
• PEAK (capture of 1 ms signals)
• MIN-MAX
• REL (relative measurements)
Metrix a Chauvin-Arnoux Brand Make MX 670
The MX 670 combines the basic functions of an AC/DC multimeter and an AC current clamp up to 1,000 A.
Its 2 TRMS measurement channels enable it to display 2 values simultaneously on its large 10,000-count backlit display and the measurements are accurate whatever the waveform and type of the signal.
Specifications:
• 10,000-count backlit display
• Clamping diameter: 42 mm
• AC current: 0.05 A to 1,000 A
• DC voltage: 0.2 A to 1,400 V
• AC voltage: 0.5 V to 1,000 V
• Resistance: 0.2 Ω to 10 kΩ
• Frequency: up to 10 kHz (A and V)
• Temperature: -40.0°C to 1,200 °C (K thermocouple)
• Diode test and audible continuity
• HOLD, MIN, MAX and Peak functions
• 600 V CAT IV
Metrix a Chauvin-Arnoux Brand Make MX 675
Description:
The MX 675 combines the basic functions of an AC/DC multimeter and Hall-effect current clamp for measuring AC and DC currents up to 1,000 A.
Its 2 TRMS measurement channels enable it to display 2 values simultaneously on its large 10,000-count backlit display and the measurements are accurate whatever the waveform and type of the signal.
Specifications:
• 10,000-count backlit display
• Clamping diameter: 40 mm
• DC current: 0.05 A to 1,400 A
• AC current: 0.05 A to 1,000 A
• DC voltage: 0.2 A to 1,400 V
• AC voltage: 0.5 V to 1,000 V
• Resistance: 0.2 Ω to 10 kΩ
• Frequency: up to 10 kHz (A and V)
• Temperature: -40.0°C to 1,200 °C (K thermocouple)
• Diode test and audible continuity test
• HOLD, MIN, MAX, Peak and ΔZero functions
• 600 V CAT IV
Metrix a Chauvin-Arnoux Brand Make MX 350
With all the essential functions (AC and DC voltage, AC current, resistance, frequency and continuity), the MX 350 multimeter clamp is easy to grip and has a particularly readable display. It enables the frequency to be measured for current (up to 10 kHz) and voltage (up to 1 MHz).
Specifications:
• 4,000-count display
• 42-segment bargraph
• Clamping diameter: 26 mm
• AC current: 40.00 A / 400.0 A
• AC voltage :400.0 V / 600 V
• DC voltage: 400.0 V / 600 V
• Frequency: 10 kHz (A) / 1 MHz (V)
• Resistance: 400.0 Ω
• Audible continuity test, diode test
• Function: HOLD
• Safety: EN61010 CAT III 300 V
Metrix a Chauvin-Arnoux Brand Make MX 355
Equipped with the essential functions (AC and DC voltage, AC and DC current, resistance, frequency and continuity), the MX 355 multimeter clamp is particularly easy to grip. This versatile instrument is ideal for electricians working on an electrical switchboard in housing or checking the power supply of a battery-powered system.
Specifications:
• 4,000-count display
• 42-segment bargraph
• Clamping diameter: 30mm
• AC current: 40.00 A / 400.0 A
• DC current: 40.00 A / 400.0 A
• AC voltage: 400.0 V / 600 V
• DC voltage: 400.0 V / 600 V
• Resistance: 400.0 Ω
• Audible continuity test, diode test
• Functions: HOLD
• Automatic ZERODC
• Safety: EN61010 CAT III 300 V
